B-006
B-006
Section B-006-004
What is the major adverse consequence of using RG-58 coaxial cable for a transmission line operating on the 70 cm band?
Losses in transmission lines increase with length and operating frequencies. RG-58 has a diameter of 5 mm. Its losses are more significant than a larger cable, such as RG-213 with a diameter of 10 mm.
Original copyright; explanations transcribed with permission from Francois VE2AAY, author of the ExHAMiner exam simulator. Do not copy without his permission.
Tags: none
What is the major advantage of open-wire transmission line?
The high Characteristic Impedances and greater separation of the conductors in parallel lines DO permit high power and high Standing Wave Ratio (SWR) BUT nearby metallic objects can affect them and impedance matching is most often necessary at the transmitter end. Their high Characteristic Impedance permits carrying power with less current (P = R * I squared), less current implies less loss due to resistance.
Original copyright; explanations transcribed with permission from Francois VE2AAY, author of the ExHAMiner exam simulator. Do not copy without his permission.
Tags: none
If your transmitter and antenna are 15 metres apart, but are connected by 60 metres of RG-58 coaxial cable, what should be done to reduce transmission line loss?
Key words: 60 METRES of RG-58. Forty-five extra metres (150 ft.) of unnecessary RG-58 (diameter = 5 mm or 0.195 in.) introduce 4 dB of loss at 30 MHz, that's the problem here.
Original copyright; explanations transcribed with permission from Francois VE2AAY, author of the ExHAMiner exam simulator. Do not copy without his permission.
Tags: none
As the length of a transmission line is changed, what happens to signal loss?
Signal loss in a given transmission line goes up with increased length or increased operating frequency. For example, 30 m of RG-58 introduce a loss of -3 dB at 50 MHz. Doubling the length, double the loss: 60 m of RG-58 lose -6 dB at 50 MHz. The original 30 m of RG-58 wastes -10 dB at 450 MHz.
Original copyright; explanations transcribed with permission from Francois VE2AAY, author of the ExHAMiner exam simulator. Do not copy without his permission.
Tags: none
As the frequency of a signal is changed, what happens to signal loss in a transmission line?
Signal loss in a given transmission line goes up with increased length or increased operating frequency. For example, 30 m of RG-58 introduce a loss of -3 dB at 50 MHz. Doubling the length, double the loss: 60 m of RG-58 lose -6 dB at 50 MHz. The original 30 m of RG-58 wastes -10 dB at 450 MHz.
Original copyright; explanations transcribed with permission from Francois VE2AAY, author of the ExHAMiner exam simulator. Do not copy without his permission.
Tags: none
Assuming the same transmitter and RF output power are used, what is the effect of changing the transmission line from RG-213 coaxial cable to RG-58?
Losses in transmission lines increase with length and operating frequencies. RG-58 has a diameter of 5 mm. Its losses are more significant than a larger cable, such as RG-213 with a diameter of 10 mm.
Original copyright; explanations transcribed with permission from Francois VE2AAY, author of the ExHAMiner exam simulator. Do not copy without his permission.
Tags: none
The lowest loss transmission line on HF is:
Open-wire line has the highest characteristic impedance. The high Characteristic Impedances and greater separation of the conductors in parallel lines DO permit high power and high Standing Wave Ratio (SWR) BUT nearby metallic objects can affect them and impedance matching is most often necessary at the transmitter end. Their high Characteristic Impedance permits carrying power with less current (P = R * I squared), less current implies less loss due to resistance.
Original copyright; explanations transcribed with permission from Francois VE2AAY, author of the ExHAMiner exam simulator. Do not copy without his permission.
Tags: none
In what values are RF transmission line losses expressed?
"Decibels per unit length". In North America, typically 'dB per 100 ft.' or 'dB per 30 m' at a given frequency. Loss rises proportionally with length. Loss goes up as frequency goes up.
Original copyright; explanations transcribed with permission from Francois VE2AAY, author of the ExHAMiner exam simulator. Do not copy without his permission.
Tags: none
If the length of a coaxial transmission line is increased from 20 metres to 40 metres, how would this affect the line loss?
If line length is doubled, the incurred signal loss is doubled. Loss for transmission lines is specified as "decibels per 100 feet (30 m)" at a certain frequency. Signal loss in a given transmission line goes up with increased length or increased operating frequency. For example, 30 m of RG-58 introduce a loss of -3 dB at 50 MHz. Doubling the length, double the loss: 60 m of RG-58 lose -6 dB at 50 MHz. The original 30 m of RG-58 wastes -10 dB at 450 MHz.
Original copyright; explanations transcribed with permission from Francois VE2AAY, author of the ExHAMiner exam simulator. Do not copy without his permission.
Tags: none
If the operating frequency is increased, how does the transmission line loss change?
The higher the frequency, the higher the loss. Larger diameter coaxial cables are recommended at VHF (Very High Frequency) and UHF (Ultra High Frequency) to minimize losses. Signal loss in a given transmission line goes up with increased length or increased operating frequency. For example, 30 m of RG-58 introduce a loss of -3 dB at 50 MHz. Doubling the length, double the loss: 60 m of RG-58 lose -6 dB at 50 MHz. The original 30 m of RG-58 wastes -10 dB at 450 MHz.
Original copyright; explanations transcribed with permission from Francois VE2AAY, author of the ExHAMiner exam simulator. Do not copy without his permission.
Tags: none