Other Equipment and Networks:
Subelement F
Section 43
Local Area Networks- NMEA-0183:
A typical PC program that is used widely for logging and troubleshooting NMEA 0183 data is:
-
Excel
-
Windows Explorer
-
Correct AnswerHyperTerminal
-
Microsoft Word
This question does not yet have an explanation!
Register to add one
Tags: none
what is the maximum signal voltage range that an NMEA-0183 unit must be capable of handling without damage?
-
+/- 5 volts
-
+/- 10 volts
-
+/- 12 volts
-
Correct Answer+/- 15 volts
This question does not yet have an explanation!
Register to add one
Tags: none
The current and most recent version of NMEA 0183 uses what standard for data communications?
-
Correct AnswerRS422
-
RS485
-
RS232
-
ISO 11783
This question does not yet have an explanation!
Register to add one
Tags: none
What type of data communication is used for NMEA 0183.
-
Parallel
-
Correct AnswerSerial
-
Can Bus
-
Ethernet
This question does not yet have an explanation!
Register to add one
Tags: none
Which of the following statements about an NMEA -0183 system is correct?
-
The cable shield must be grounded at both ends including the opto-isolators.
-
Correct AnswerOpto-isolators must be used and the shield should be grounded to the talker chassis only.
-
Opto-isolators must be used and the shield should be grounded to the listener chassis only.
-
Version 2 devices use higher voltages than version 1 devices.
This question does not yet have an explanation!
Register to add one
Tags: none
An important difference between NMEA 0183 and NMEA 2000 is:
-
Relay switched vs diode switch
-
Low voltage vs high voltage
-
Correct AnswerSingle talker vs multi-talkers
-
Data transfer vs video transfer
This question does not yet have an explanation!
Register to add one
Tags: none
HamStudy.org™ is copyright 2024 Signal Stuff™, All rights
reserved.
View Privacy Policy | Get help with HamStudy.org™
View Privacy Policy | Get help with HamStudy.org™