Login or Register for FREE!
Login or Register for FREE!
Subel. F
6 questions
Subelement F

Maritime Safety Information (M.S.I.):

Section 37

Navtex-1: Operations:

How is mutual interference on 518 kHz among NAVTEX stations avoided?

  • Correct Answer
    Transmissions scheduled on a time-sharing basis, power limited and station assignment codes are geographically separated.
  • All stations transmit at the same time but stations are limited to daytime operation only to reduce the radius of propagation.
  • Transmitter power is limited, station assignment codes are not shared by other NAVAREAS and stations alternate between daytime and nighttime operations.
  • Station codes are not shared by other NAVAREAS, transmissions scheduled on a time-sharing basis and power is limited.
This question does not yet have an explanation! Register to add one

Tags: none

When do NAVTEX broadcasts typically achieve maximum transmitting range?

  • Local noontime
  • Correct Answer
    Middle of the night
  • Afternoon
  • Sunset
This question does not yet have an explanation! Register to add one

Tags: none

What should a GMDSS Radio Operator do if a NAVTEX warning message is received but it contains too many errors to be usable?

  • Contact the NAVAREA coordinator and request a repeat broadcast.
  • Initiate a request for Category A, B, L and D messages.
  • Correct Answer
    Do nothing. Vital NAVTEX messages will be repeated on the next scheduled broadcast.
  • Listen to appropriate VHF weather channel for repeat warnings.
This question does not yet have an explanation! Register to add one

Tags: none

Which of these cannot happen when a paper model NAVTEX receiver runs out of paper?

  • The unit is unable to print messages and all subsequent MSI broadcasts may be missed until the paper is replaced.
  • It may give off either an audible and/or visual alarm.
  • MSI messages may be missed because the unit cannot print them out.
  • Correct Answer
    The system will automatically change from receiving MSI by NAVTEX to receiving it by SafetyNETTM so that no messages will be lost.
This question does not yet have an explanation! Register to add one

Tags: none

Which of the following is the primary frequency that is used exclusively for NAVTEX broadcasts internationally?

  • Correct Answer
    518 kHz
  • 2187.5 kHz
  • 4209.5 kHz
  • VHF channel 16 when the vessel is sailing in Sea Area A1, and 2187.5 kHz when in Sea Area A2.
This question does not yet have an explanation! Register to add one

Tags: none

What is the transmitting range of most NAVTEX stations?

  • Typically 50-100 nautical miles (90-180 km) from shore.
  • Correct Answer
    Typically 200-400 nautical miles (360-720 km).
  • Typically upwards of 1000 nautical miles (1800 km) during the daytime.
  • It is limited to line-of-sight or about 30 nautical miles (54 km).
This question does not yet have an explanation! Register to add one

Tags: none

Go to 36 Go to 38
HamStudy.org™ is copyright 2024 Signal Stuff™, All rights reserved.
View Privacy Policy    |    Get help with HamStudy.org™